Customer Case

200 TPH Limestone Aggregate Production Line

Four commercial limestone sizes for Hubei's batching plants, produced by a mobile SF-580D and SS-7018 pair running above its 200 TPH design point.

200 TPH Limestone Aggregate Production Line

Project Overview

Huangmei County sits on some of Hubei's most accessible limestone, and the local concrete market consumes it as fast as it can be quarried. The customer's brief was specific: a mobile line rated at 200 TPH design capacity, producing the four commercial sizes that batching plants actually order.

Medium-soft limestone suits impact crushing, so the SF-580D carries the line while the SS-7018 inclined screen splits the discharge into 0-5mm manufactured sand and three stone sizes. Under site conditions the train has run above its design point without stressing the plant.

Equipment Used in the Project

This line is built on the impact + screen soft rock configuration. The full machine list, flow and sizing logic are on that page.

Process Focus

Impact crusher and multi-deck inclined screen producing four commercial limestone sizes for the local batching-plant market.

Site Requirement

Design capacity 200 TPH, four specific commercial gradations, and mobile deployment on a flexible quarry site.

Project Result

  • Site production has measured 220-240 TPH, above the 200 TPH design figure.
  • All four commercial sizes produced to batching-plant specification.
  • The customer runs the line as its primary supply of commercial concrete aggregate.

Related Projects

Similar material or similar site conditions.

Ask About This Project

No two sites are identical. Describe yours in three facts (rock, maximum lump, target rate) and we will tell you exactly which part of this configuration would change.

Send Your Specs