Precise horizontal screening
The SSP-6200 screens horizontally rather than on an incline: a 6,200 × 1,930 mm three-deck box with 15 kW drives on each deck, 220–400 t/h, 100 mm maximum feed, on a 37 t tracked chassis. Horizontal motion is the answer to damp, sticky or high-moisture material that will not travel down a steep deck.
A short walk-around filmed on a customer site — feeding, crushing and discharge, so you can see how the machine actually runs before you shortlist it.
Watch more videosConveys the bed by stroke instead of relying on gravity.
Screens material that is still draining.
Three decks and four conveyors from one pass.
An inclined screen relies on gravity to move material and on a steep angle to keep it moving. Wet feed defeats both: the bed slides slowly, the depth builds up, and the deck blinds. A horizontal screen conveys the material with the vibration itself, so the bed travels at a controlled speed regardless of moisture, and each particle gets more exposure to the aperture because the deck is longer in effective terms.
That makes the SSP-6200 the plant for tropical and temperate markets where the feed is rained on, for washed material that has not fully drained, and for recycled aggregate with a high fines content. Four conveyors handle the split, so the plant produces up to four products from one pass without a second screening stage.
The box runs a linear stroke at a shallow angle, close to horizontal, with drive pairs counter-rotating so the motion is straight-line rather than circular. Material is thrown forward and slightly up on each cycle, advancing along the deck in a controlled bed. Because transport comes from the stroke and not from gravity, the feed rate can be held steady even when the material is wet enough to stop an inclined deck.
The three decks are configured in series, each taking a cut: coarse off the top, then a mid grade, then a fine grade, with the passing material collected underneath. Long residence time and a tumbling bed give damp particles repeated chances to find an aperture, which is why a horizontal box holds its efficiency where an inclined one loses it.
Requires external power supply
Built-in generator, diesel driven
China III / IV · EPA Tier 4 / Euro V
18-Month Warranty · Installation & Training · Remote Diagnostics · Spare Parts Supply
How this machine is paired with the rest of the plant, and what changes when the feed changes.
Screening in a hard rock line › Screening in a soft rock line ›
Specification sheets, the 18-month warranty terms and answers to the questions buyers ask first.
Download brochures & spec sheets › Watch the machines at work › Warranty & service programme › Crusher FAQ ›
The four questions buyers ask first about this machine - answered from the spec sheet, the cases library and the service programme.
When the feed is damp, sticky or full of near-size material. Horizontal motion keeps the material on the deck longer at a lower angle, so it separates instead of riding over the media; the 6,200 × 1,930 mm box runs 220–400 t/h on a 37 t chassis.
Three decks plus a fines conveyor give four fractions, and the split sizes come from the media chosen at order. Deck media is quoted with the machine because the split is what the local market buys, not a fixed factory setting.
Deck count and deck split sizes are in the spec table above. Deck count decides how many saleable fractions one pass produces; the solutions pages map typical two-deck and three-deck splits to standard commercial gradations.
Standard build is 20 working days after deposit, before inland transport and sea freight; custom configurations are scheduled at drawing confirmation. Screen media ships packed with the plant so first-day production does not wait on mesh panels. Body warranty runs 18 months from commissioning or 3,000 operating hours, whichever comes first.
Specifications may vary depending on final configuration and project requirements. A dash or blank means the parameter is not listed for this model.
| Feeding equipment | |
|---|---|
| Hopper volume | 3 m³ |
| Feed capacity | 300–500 t/h |
| Feeder power | 11 kW |
| Vibrating screen | |
| Screen size (L×W) | 6,200×1,930 mm |
| Maximum feeding granularity | 100 mm |
| Processing capacity | 300–500 t/h |
| Power / layers | 15 kW×3 / 3 layers |
| Feeding belt | |
| Width × length | 1,000×5,600 mm |
| Power | 11 kW |
| Side belt conveyors (×3) | |
| Width × length | 600×6,850 mm |
| Discharge height | 3,000 mm |
| Power | 5.5 kW |
| Under-screen belt | |
| Width × length | 1,200×6,200 mm |
| Discharge height | 1,500 mm |
| Power | 7.5 kW |
| Track system | |
| Specification (L×W) | 5,000×500 mm |
| Maximum inclination | 30° |
| Walking speed | 0–2.6 km/h |
| Complete machine | |
| Whole machine weight | 37 t / 39 tDP |
| Machine processing capacity | 220–400 t/h |
| Total power | 69 kW |
| Shipping dimensions (L×W×H) | 14,300×3,630×3,850 mm |
| Working size (L×W×H) | 13,100×12,000×5,000 mm |
Tell us your raw material, required capacity, feeding size and final output size. Our engineer will recommend the suitable model for your project.
Your cookie choices
We store your choice on this device so we do not have to ask again. Analytics and marketing cookies stay off unless you allow them. Privacy Policy
EN