High-capacity integrated processing
The SF-580D-S pairs the 1315 three-chamber rotor with a two-deck screen on one 59.5 t chassis: over 700 mm feed, 150–350 t/h, two aggregate sizes in closed circuit. It is the largest single-unit demolition plant we build: concrete in at one end, graded recycled aggregate out at the other.
One machine, three finished aggregate sizes. Watch the closed-circuit impact plant crush, screen and recirculate oversize material in a single pass.
Watch more videosStructural concrete with rebar, processed to two saleable grades.
Oversize recirculated instead of stockpiled as reject.
One chassis, one operator, one transport list.
On a big demolition contract the constraint is rarely the crusher; it is the number of machines that have to be coordinated on a site that is being taken down around them. One chassis carrying crusher, screen, magnet and conveyors means one transport list, one operator, and one footprint that can be repositioned as the building comes down.
The closed circuit is what makes the output saleable. Oversize returns to the chamber instead of accumulating as a reject pile, so the plant produces two consistent grades rather than one grade plus a problem. For a contractor paying tipping fees on mixed rubble, that is the difference between a cost centre and a revenue line.
The rotor throws material against three aprons in sequence, reducing it in a single pass, and the discharge lands on a two-deck screen mounted on the same frame. The top deck returns oversize to the crusher on an internal belt; the second deck splits the passing material into two grades. The loop is short, so the circulating load stays low and the plant settles into steady operation quickly.
The aprons and the screen are hydraulically and electrically integrated with the crusher, so a single control station runs the whole plant. Because the circuit is closed, the crusher setting and the deck choice together define the products: change the deck, and the same rotor setting delivers a different pair of grades without touching the chamber.
Requires external power supply
Built-in generator, diesel driven
China III / IV · EPA Tier 4 / Euro V
18-Month Warranty · Installation & Training · Remote Diagnostics · Spare Parts Supply
How this machine is paired with the rest of the plant, and what changes when the feed changes.
Specification sheets, the 18-month warranty terms and answers to the questions buyers ask first.
Download brochures & spec sheets › Watch the machines at work › Warranty & service programme › Crusher FAQ ›
The four questions buyers ask first about this machine - answered from the spec sheet, the cases library and the service programme.
Over 700 mm feed down to 0–180 mm at 150–350 t/h, with the two-deck screen closing the circuit so oversize returns to the 1315 rotor. That is structural concrete and quarry overburden handled by one 59.5 t unit.
A low-bed move with whatever permit the local axle rules require, hard standing for the truck dump, and 382.4 kW of installed power to feed - mains where the site has it, otherwise a gen-set sized to the plant rather than to the crusher alone.
Impact models are the standard choice for C&D recycling, typically with magnetic separation ahead of the chamber - the Thai recycling cases show the full setup. VSI units are shaping and sand machines: they belong after the demolition stream has already been cleaned and crushed.
Standard build is 20 working days after deposit, before inland transport and sea freight; custom configurations are scheduled at drawing confirmation. On contractor duty the bottleneck is usually wear parts, not the machine, so blow bars and rotors are quoted with the plant and air-freighted in 3-7 days when stock runs low. Body warranty runs 18 months from commissioning or 3,000 operating hours, whichever comes first.
Specifications may vary depending on final configuration and project requirements. A dash or blank means the parameter is not listed for this model.
| Feed section | |
|---|---|
| Feeding capacity | 350 t/h |
| Hopper volume | 6 m³ |
| Power | 4.5 kW×2 |
| Feeder size (L×W) | 3,500×1,460 mm |
| Feeding height | 3,900 mm |
| Impact crusher | |
| Crusher model | 1315 impact crusher |
| Feed inlet size (L×W) | 1,540×1,100 mm |
| Maximum feed particle size | >700 mm |
| Discharge range | 0–180 mm |
| Crusher weight | 23 t |
| Crusher power | 315 kW |
| Screening module | |
| Screen size | 4,600×1,540 mm |
| Screen layers | 2 |
| Finished sizes | 2 aggregate sizes simultaneously |
| Main belt | |
| Length × width | 12,480×1,600 mm |
| Discharge height | 3,300 mm |
| Power | 9.2 kW×2 |
| Finished belt | |
| Length × width | 5,800×1,350 mm |
| Discharge height | 2,370 mm |
| Power | 5.5 kW×2 |
| Return material screen | |
| Screen size | 5,800×2,160 mm |
| Power | 5.5 kW×2 |
| Conveyor belts | |
| Side conveyor belt (L×W) | 6,500×970 mm |
| Side conveyor power | 5.5 kW |
| Transition belt (L×W) | 1,750×770 mm |
| Transition belt power | 3 kW |
| Return belt (L×W) | 8,050×970 mm |
| Return belt power | 5.5 kW |
| De-ironing separator | |
| Length × width | 2,100×910 mm |
| Power | 4 kW |
| Complete machine | |
| Track chassis model | LDZ60-4037 |
| Engine power | 100 kW / 520 kWDP |
| Whole machine weight | 59.5 t / 61.5 tDP |
| Machine processing capacity | 150–350 t/h |
| Total power of crushing work | 382.4 kW |
| Working dimensions (L×W×H) | 18,500×8,250×4,900 mm |
| Transportation dimensions (L×W×H) | 18,500×3,800×3,970 mm |
Tell us your raw material, required capacity, feeding size and final output size. Our engineer will recommend the suitable model for your project.
Your cookie choices
We store your choice on this device so we do not have to ask again. Analytics and marketing cookies stay off unless you allow them. Privacy Policy
EN