Three-size output in one unit
The SF-380D-2S adds a third deck, so one 54.3 t tracked plant produces three finished aggregate sizes at once: 600 mm feed, 150–240 t/h, 1214 impactor at 250 kW. It is the answer for the operation that would otherwise run a crusher plus a standalone three-deck screener, and the loader that feeds it.
One machine, three finished aggregate sizes. Watch the closed-circuit impact plant crush, screen and recirculate oversize material in a single pass.
Watch more videosFine, mid and coarse fractions from a single pass.
A full product catalogue from one tracked plant.
Room for the 10.8 m working envelope, one machine instead of three.
Three products from one pass changes what a small quarry or recycling yard can sell. Instead of a single sub-base grade, the plant delivers a fine, a mid and a coarse fraction simultaneously, each to its own stockpile on its own belt. For an aggregate supplier, that is the difference between selling a by-product and selling a catalogue.
The trade-off is width: the working envelope runs to 10.8 m with the side conveyers extended, so the site has to be laid out for it. Where that space exists, such as a quarry bench or a demolition site with room to spread, the plant replaces a three-machine spread with one, and every tonne it produces avoids a handling step.
Crushed material leaves the rotor and drops onto a three-deck inclined screen carried on the same chassis. The top deck returns oversize to the chamber; the middle and bottom decks split the passing material into three grades, each discharged by its own belt. Because the oversize recirculates internally, the plant closes its own circuit and the product sizes stay within tolerance instead of drifting with feed variation.
The screen is driven from the plant's hydraulic system, so there is no separate power pack. Changing a product means changing a deck, not re-setting the crusher: the rotor gap stays where it was set, and the split points move to where the market wants them. That is what lets the same machine supply a road contract and a concrete plant in the same week.
Requires external power supply
Built-in generator, diesel driven
China III / IV · EPA Tier 4 / Euro V
18-Month Warranty · Installation & Training · Remote Diagnostics · Spare Parts Supply
How this machine is paired with the rest of the plant, and what changes when the feed changes.
Site conditions, throughput and the result the customer reported.
Specification sheets, the 18-month warranty terms and answers to the questions buyers ask first.
Download brochures & spec sheets › Watch the machines at work › Warranty & service programme › Crusher FAQ ›
The four questions buyers ask first about this machine - answered from the spec sheet, the cases library and the service programme.
By what the local market buys. The third deck adds 2.9 t and 5.5 kW and splits the same 150–240 t/h three ways instead of two, so it pays only if the third fraction sells at aggregate prices rather than going back into the crusher or onto a waste pile.
The deck can be fitted with different media or the split re-set at order, which is why deck configuration is confirmed with the quotation. If two sizes are all the site will ever sell, the -S version is the same plant 2.9 t lighter.
Impact models are the standard choice for C&D recycling, typically with magnetic separation ahead of the chamber - the Thai recycling cases show the full setup. VSI units are shaping and sand machines: they belong after the demolition stream has already been cleaned and crushed.
Standard build is 20 working days after deposit, before inland transport and sea freight; custom configurations are scheduled at drawing confirmation. On contractor duty the bottleneck is usually wear parts, not the machine, so blow bars and rotors are quoted with the plant and air-freighted in 3-7 days when stock runs low. Body warranty runs 18 months from commissioning or 3,000 operating hours, whichever comes first.
Specifications may vary depending on final configuration and project requirements. A dash or blank means the parameter is not listed for this model.
| Feed section | |
|---|---|
| Feeding capacity | 230 t/h |
| Hopper volume | 5 m³ |
| Power | 4.5 kW×2 |
| Feeder size (L×W) | 3,550×1,280 mm |
| Feeding height | 3,850 mm |
| Impact crusher | |
| Crusher model | 1214 impact crusher |
| Feed inlet size (L×W) | 1,380×1,000 mm |
| Maximum feed particle size | 600 mm |
| Discharge range | 0–150 mm |
| Crusher weight | 18 t |
| Crusher power | 250 kW |
| Screening module | |
| Screen size | 4,600×1,540 mm |
| Screen layers | 3 |
| Finished sizes | 3 aggregate sizes simultaneously |
| Main belt | |
| Length × width | 11,200×1,600 mm |
| Discharge height | 2,900 mm |
| Power | 9.2 kW×2 |
| Finished belt | |
| Length × width | 5,300×1,350 mm |
| Discharge height | 2,100 mm |
| Power | 5.5 kW×2 |
| Return material screen | |
| Screen size | 5,150×2,160 mm |
| Power | 5.5 kW×2 |
| Conveyor belts | |
| Side conveyor belt (L×W) | 5,135×800 mm |
| Side conveyor power | 5.5 kW×2 |
| Transition belt (L×W) | 1,750×770 mm |
| Transition belt power | 3 kW |
| Return belt (L×W) | 7,300×970 mm |
| Return belt power | 5.5 kW |
| De-ironing separator | |
| Length × width | 2,100×910 mm |
| Power | 4 kW |
| Complete machine | |
| Track chassis model | LDZ55-3657 |
| Engine power | 100 kW / 400 kWDP |
| Whole machine weight | 54.3 t / 56.3 tDP |
| Machine processing capacity | 150–240 t/h |
| Total power of crushing work | 322.9 kW |
| Working dimensions (L×W×H) | 17,800×10,800×4,700 mm |
| Transportation dimensions (L×W×H) | 17,800×3,780×3,850 mm |
Tell us your raw material, required capacity, feeding size and final output size. Our engineer will recommend the suitable model for your project.
Your cookie choices
We store your choice on this device so we do not have to ask again. Analytics and marketing cookies stay off unless you allow them. Privacy Policy
EN